Inspection Manufacturers & fabricators

Early access Live with an early manufacturing customer — wider roll-out under way.

InspectIQ — the inspection register that writes your certificates for you.

A template-driven inspection & test-records engine for manufacturers and fabricators. Pick a test — weld visual inspection, bend, wall-tie load, galvanising coating, tensile/proof-load, electrical certificates (EIC / EICR / Minor Works), F-Gas, gas appliance safety checks or a general inspection — and InspectIQ builds the form, the certificate and the batch report from the same template. A Product Library pre-fills each test with your pass requirements (declared values, DoP figures or manufacturer's instructions), imported straight from your spreadsheet. Every record is operator-stamped, immutably certificate-numbered and backed by a tamper-evident audit trail. Runs standalone, or embeds as an inspections tab inside AssureIQ (statutory: LOLER / fire / legionella) or TradeIQ (Gas Safe / CP12). A native mobile app is live on the App Store — the Google Play version is in development.

Click to demo →See pricing

11 inspection templatesProduct Library — pass limits pre-filledDoP / UKCA conformityNCR / CAPA workflowTamper-evident audit trailQR verify on any deviceMobile app live on the App Store · Google Play in development

InspectIQ — New Inspection

📱Live now

The InspectIQ mobile app is live — on your phone or tablet today

Capture photo evidence, run the test and certify on site, even offline — then print or share the QR-verified certificate straight from your phone or tablet.

Live on theApp Store In development forGoogle Play See it on your phone or tablet ↓

What it does

Everything InspectIQ surfaces, in one place.

📋

Template-driven, not paperwork

Weld visual inspection (BS EN ISO 17637, acceptance to a BS EN ISO 5817 quality level), bend test (BS EN ISO 7438), wall-tie load (BS EN 845-1), galvanising coating (BS EN ISO 1461), tensile/proof-load (BS EN ISO 6892-1), electrical certificates (BS 7671: EIC, EICR, Minor Works), F-Gas, gas appliance safety checks (Gas Safety Regs 1998) and general inspection — the form, certificate and batch report all render from the same config. A Product Library pre-fills each test with your pass requirements, imported from CSV or straight from Excel.

Immutable certificate numbering

Every record gets a unique, sequential Certificate No — shared across every template so nothing gets renumbered or lost.

⚖

DoP / UKCA conformity

Issue UKCA Declarations of Performance and Certificates of Conformity straight from the same inspection data — manufacturer, AVCP system and declared-performance table auto-filled.

⚠

NCR / CAPA built in

A failed inspection can raise a non-conformance in one click — root cause, containment and CAPA owner tracked to close-out, ISO 9001 clause 10.2 style.

⚿

A hash-chained audit trail

Every create, edit, void and print is logged and chained — tamper-evident by design, not just a changelog.

▦

A client-ready evidence pack

Export a self-contained certificate + full audit trail + amendment history as one file, ready to send to a customer's quality department.

Who it's for

Built for the QC desk, not a generic form builder.

Metal fabricators, wall-tie and galvanising suppliers and anyone certifying to a product standard — InspectIQ replaces a folder of Word templates and a spreadsheet register with one auditable system. Beyond product-standard inspections, we can also help you prepare for and maintain ISO 9001 and ISO 14001 — the NCR/CAPA workflow and audit trail above map directly onto both.

InspectIQ — Dashboard

✓

One template, every output

The test form, the printable certificate and the batch report all come from the same template — no separate documents to keep in sync.

📷

Photo evidence, QR verify

Attach photo evidence per inspection, then print a QR label that opens a self-checking verify card on any phone — no app required.

🔗

Shares a customer list

Embeds into AssureIQ or TradeIQ over the same customer/site list, so gas, statutory and product inspections sit in one place when you need more than one.

Talk to us about InspectIQ

Standards & honesty

Structures the record — the standard still defines pass/fail.

BS EN ISO 7438 and the other product/material standards define the test method, not the acceptance criteria — InspectIQ records the applicable standard against every test, then your inspector certifies against it. That's a deliberate honesty line, not a gap.

17637

BS EN ISO 17637 / 5817

Visual testing of fusion welds — WPS and welder qualification recorded, acceptance against an ISO 5817 quality level (B/C/D).

7438

BS EN ISO 7438:2020

Metal bend test method — former Ø, angle, number of bends, recorded per specimen.

845-1

BS EN 845-1 / 846-5/6

Cavity wall-tie tension/compression load test, for wall-tie and masonry-connector manufacturers.

1461

BS EN ISO 1461

Hot-dip galvanised coating thickness/mass check for galvanised steel components.

10204

EN 10204 doc types

2.1/2.2/3.1/3.2 inspection-document classification recorded on every certificate.

InspectIQ structures your inspection records to match the method defined by these standards; it is not a certification body and does not replace your own competence or quality-management judgement — confirm your specific obligations with your quality manager or notified body. Full standards breakdown →

Start scoping → Click to demo →